All Products

ventilation pipe clamps galvanized

Field of application For attachment of spiral ducts Advantages Manufactured to suit air duct dimensions The 2 locking screws allow adjustment to accommodate a greater variation in pipe diameter UB suspension clamps are used for suspending...

rectangular galvanised ducting Fittings

The inner angles of SBW could be rectangular or circular arc, when ordering please specify. If the defending net is demanded, please indicate. Square duct can be made according to customer requirements, in ine with customer requirements of the size...

Air vents with air doors for ventilation ducts

The ductwork regulates the flow of air and redirects it to specific places of a house. The same kind of company in the sale also Back Draft Damper. Our Ventilation Duct Dampers are made from stainless steel. It can be used for wind protection....

Air conditioning system four-way pipe fittings

Four for the connection of spiral duct in the ventilation system, four branch caliber can be customized according to customer requirements, the material can be customized stainless steel and galvanized Choose stainless steel sheets,aluminium sheets...

pressed male reducers and fittings

FN reducers are centric and male-male pressed. If gasket is not needed, please specify “X“ after type, i.e. FX. 1, This product is used in Marine engineering, laboratory engineering and other ventilation pipe fittings connector; 2, the use of raw...

Fixed bed tubular reactor

The reactor is a kind of equipment to realize the reaction process, which is used to realize the liquid-phase single-phase reaction process and liquid-liquid, gas-liquid, liquid-solid, gas-liquid-solid and other multiphase reaction process. Mainly...

White Square adjustable Diffuser

SQUARE AND RECTANGLE AIR PATTERN 1.Square Diffuser are typically used in applications where considerable volumes of air are required while maintaining relatively low noise levels and pressure drops. 2. A full range of models are available and...

ventilation duct damper kit

Our Ventilation Duct Dampers are made from stainless steel. It can be used for wind protection. Designed for use in AC, dryer vent, exhaust, extractor, heating systems, ventilation system, and other residential, commercial, and industrial HVAC...

HVAC Damper Manual Volume Damper

Balancing dampers are simply manual dampers encased in a galvanized sheet metal sleeve. Each branch should have a balancing damper installed. That way, it's possible to regulate the airflow by adjusting the position of the damper. They should be...

300 GVH 250 Pressed reducer male/female with KEN-LOK

Suitable for the size and diameter conversion of Spiral Ducts in ventilation system. The largest end of the Pressed Female Reducers fits over a fitting and the smallest fits into a Spiral Ducts. This allows another large fitting of the same diameter...

Pressed reducer male/female GVH

Suitable for the size and diameter conversion of Spiral Ducts in ventilation system. The largest end of the Pressed Female Reducers fits over a fitting and the smallest fits into a Spiral Ducts. This allows another large fitting of the same diameter...

ventilation duct dampers to hvac

Our Ventilation Duct Dampers are made from stainless steel. It can be used for wind protection. Designed for use in AC, dryer vent, exhaust, extractor, heating systems, ventilation system, and other residential, commercial, and industrial HVAC...

Duct Cross Steel Pipe Fittings for Air Conditioning

Four for the connection of spiral duct in the ventilation system, four branch caliber can be customized according to customer requirements, the material can be customized stainless steel and galvanized. Pipe punch forming.standard and large-scale...

Pressed Female Reducers for ventilation

Reducing pipe (size head) is a piece of pipe used in reducing pipe diameter. The forming process is usually used for reducing the diameter pressing, expanding pressing or reducing the diameter and expanding pressing, for some specifications of...

Short ventilation reducer with female connection

This Pressed Female Reducers is perfect for heat recovery systems and ventilation system. Standard nominal diameters up to DN 315 mm are available for pressed pieces at a lower price and with an improved finish. Reducing pipe (size head) is a piece...

Soler & Palau S&P SIL-315 Inline Duct Silencers

Advantage： Our company produces two kinds of silencer, one is Ventilation duct silencer and the other is Rectangle Silencer,Permit circulation of air in either direction, yet effectively stop noise in both directions. Easy to install and maintenance...

T-piece with rectangular outlet

The wye tees are fitted with sheet angles, and the entire fitting is braced by cross-wise ribbing. This fitting allows building the ventilation system with two take-offs set at any angle. The width may vary between the two take-off ports. Maximum...

T-piece 90 degree duct fitting Galvanized Steel

If gasket is not needed, please specify “X” after type, i.e. tx. After the pieces are cut, we brake and bend to form the duct fittings and custom sections. TVBX type is made up of TVX type and bend. Standaro d TVBX is without gasket, and if gasket...

Galvanized Steel Spiral Duct Fitting Tee T-Piece

90 degree duct tee fittings from Sheet Metal Connectors (SMC) are manufactured with an elbow lock seam, lap seam (i.e. stitch weld, riveted, tack weld or solid weld), standing seam or butt weld seam. These may be with or without duct sealant....

Double-row ventilation grille with adjustable louvres

Features: Double-layer outlet louvers: 1.have double-layer adjustable blade to supply air to different distances and different angles. 2.can be used as air outlets. 3.can be made of alum. alloy or steel. 4.can be used together with dampers. 5.have...

rectangular duct to round

Features: Rectangular to round transition are ideal for transitioning round to rectangular ductwork or for use as a hood. Square to square transitions do not provide the same quality of airflow as rectangular to round and are designed for...

square to round duct transition

Features: Rectangular duct finished product appearance,size, accu trate rules, smooth lines, sealing performance industry-leading advanced production technology, accurate cutting, low mate rial consumption, product quality and stability. Rectangular...

Pressed T-Pieces for ventilation system

Pressed T-Pieces are made up of pressed collar saddle and main pipe. TP type is made up of two pressed parts. If gasket is not needed, please specify “X” after type, i.e. tx. Pressed T-Pieces are made up of collar saddle and main pipe. TVX type is...

Rectangular T-pieces and crossing T-pieces

The Rectangular Vent Duct and Round Metal Duct Pipe are used in industrial buildings, halls and other objects where round elements cannot be used. Rectangular duct system is widely used in land, ship, of fshore platform ventilation, air...